Cold Air Intake System Parts
If you install a cool air system you will find a variety of different kinds of parts. What are all these pieces for your Honda Accord cool intake system. I would guess you thought that an Accord system was one large single piece of hardware that was easy to install, just like the stock factory airbox. Sorry but if you want the advantages of increased power, a new engine sound, and a very attractive looking system, you will have to install various different parts. It's not very hard, if you can follow the instructions.
Every manufacturer of an cool air intake system tackles their design from different standpoints. This can result in a different number of individual parts that you must install in your vehicle.
- You can buy an air system like the Schmidt Motor Works Ram Air Cleaner Air Intake system. This has a basic box which replaces your stock air system filter. This is one of the simplest air intake systems on the market.
- Or you might purchase an air intake system that has a variety of tubes, made out of plastic, steel, Kevlar, fiberglass or even carbon fiber. If there are many tubes, then the cool air intake kit will should also include spacer and connection parts to join the system intake tubes together. It is also possible that you might also have shorter pieces of pipes which are connected to other parts of your engine air intake system.
- For example, if you had bough an Injen MegaRam cold air system you would receive: 1 - 3 &fraq12;" Air Intake system; 1 - 3 1/2 " Injen filter; 1- Molded 60 degree elbow; 2 - Medium clamps; 1 - Mini clamp; 1 - Sensor grommet; 1 - Vibra-mount; 1 - Flange nut; 1 - Fender washer; 1 - License plate frame (to advertise your new product); and 1 - set of system instructions.
- However if you had bought an Airaid Intake system for a Chevrolet Silverado "Classic" HD 6.0L V-8 system, you would have received: 1 - Airaid Premium Filter; 1 - Rear Air Dam Coated; 1 - MAF Panel Coated; 1 - Filter Adapter; 1 - Airaid Intake Tube; 1 - Urethane Hump Hose; 1 - GM Coupler; 1 - Weather Strip 21"; 1 - Set of Instructions; 5 - 6-32 x 5/16" Screw; 5 - #6 Flat Washer; 5 - 6-32 Keps Nut; 3 - &fraq14; x 20 &fraq12;' Button Head Bolt; 7 - Flat Washer; 4 - Mg-1x25 Hex Bolt and 2 - #60 Hose Clamp.
Remember that all of these intake systems must be installed correctly. They must also pass any special state requirements. So check the description to insure that the system you want is legal in your state.
Accord Cold Air Intake Kits
|